AeroCool Cronus ARGB E-ATX Mid Tower Case

Cronus

ARGB MID TOWER CASE

Wide and sturdy chassis design supports E-ATX motherboards for maximum performance and three additional expansion slots for vertical graphics card installation. Designed by ThunderX3, this high-performance mid tower case features an X-shaped RGB LED front panel design to add a stylish flair to your rig.

Access 16.8 million colors using compatible ARGB motherboards including ASUS Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion. Addressable RGB can be controlled using any of two ways: LED control button or ARGB motherboard.

• Comes equipped with one 14cm ARGB fan in the rear of the case
• Includes a GPU bracket that keeps your graphics card stable and prevents it from sagging
• Full tempered glass side panel to showcase the inside of your rig
• Six rubber cable grommets and two cable passthrough tubes allows for efficient cable management
• Supports liquid cooling in the front, top, and rear of the case

WIDE AND STURDY CHASSIS DESIGN

Featuring a chassis design focused on delivering increased interior space, you now have more freedom and possibilities to customize your PC how you want.

With more room for your graphics card, coolers and fans, and even your motherboard, the Cronus will allow you to fully maximize the performance of your PC build.

DESIGNED FOR OPTIMAL GRAPHICS CARD INSTALLATION

Built with three additional vertical expansion slots, allowing you to install your graphics card at a vertical position.

Includes a GPU bracket that keeps your graphics card stable and secure while preventing it from sagging.

ADDRESSABLE RGB COMPATIBLE

Access 16.8 million colors using compatible ARGB motherboards including ASUS Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion (with 5V 3-Pin ARGB header).

Addressable RGB can be controlled using any of two ways: LED control button or ARGB motherboard.

6-PORT RGB CONTROL HUB

Features a 6-port hub with PWM control functions and allows you to connect up to six 6-Pin AeroCool Addressable RGB fans and up to two 3-Pin Addressable RGB accessories with +5V ARGB connector.

Motherboard connector supports Addressable RGB motherboards (Asus Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion).

PWM COMPATIBILITY 

Please check if the 4-Pin fan header on your motherboard is PWM compatible.

• PWM based – PWM compatible
• Voltage based – not PWM compatible

ONE 14CM ADDRESSABLE RGB FAN INCLUDED

Comes equipped with one 14cm Addressable RGB fan in the rear of the case to add a stylish flair to your rig.
ARGB fan can be controlled using LED control button or ARGB motherboard.

STYLISH RGB FRONT PANEL DESIGN

Featuring a X-shaped RGB LED front panel design, this case delivers a dynamic yet powerful look and feel to your gaming setup.

Bring your case to life with preset lighting modes that can be readily controlled via LED control button.

E-ATX MOTHERBOARD SUPPORT

With support for E-ATX motherboards, this mid tower case is built for maximum performance.

BUILT FOR HIGH PERFORMANCE

• Supports E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards
• Supports CPU coolers up to 180mm
• Supports high-end graphics cards up to 387mm (without front radiator)
   

EFFICIENT CABLE MANAGEMENT

Comes equipped with six rubber cable grommets and two cable passthrough tubes (includes two additional tubes) on the motherboard tray to keep your cables neat, tidy, and secure.

FULL TEMPERED GLASS SIDE PANEL

Comes equipped with a full tempered glass side panel to showcase the inside of your rig while putting your components on full display.

IMPROVED AIR VENTILATION 

Air vents in the front panel increase air flow and ventilation to keep your system cool.

AIR COOLING 

Supports air cooling in the front, top and rear of the case to enhance cooling performance

Front: 120mm x 3 or 140mm x 2 (Max.)
Top: 120mm x 2 or 140mm x 2 (Max.)
Rear: 120mm x 1 or 140mm x 1 (140mm ARGB fan x 1 included)

LIQUID COOLING 

Supports liquid cooling in the front, top, and rear of the case for maximum efficiency cooling.

Front: 120/240mm Radiator (Optional)
Top: 120/240mm Radiator (Optional)
Rear: 120mm Radiator (Optional)

CONVENIENT ACCESS TO YOUR MEDIA 

Quick and easy access to LED control button, 2 x USB 3.0, HD audio and mic ports, and power & reset button.

STORAGE CAPABILIT 

Supports up to 3 x 3.5” HDDs (2 x 3.5” and 1 x 3.5”/2.5″) and 5 x 2.5” SSDs (4 x 2.5” and 1 x 2.5”/3.5”).

EASY MAINTENANCE 

Comes equipped with removable dust filters for convenient cleaning and maintenance.

Specifications

Model Cronus-G-BK-v1 Case Type Mid Tower Color Black Body Material SPCC Front Panel Material ABS + Steel Steel Thickness 0.7mm Motherboards E-ATX/ATX/micro ATX/mini-ITX Case Dimensions (Internal) 230 x 470 x 390mm (W x H x D) Case Dimensions (Overall) 230 x 502 x 468mm (W x H x D) 3.5” Drive Bays 3 Max. (2 x 3.5” and 1 x 3.5”/2.5″) 2.5” Drive Bays 5 Max. (4 x 2.5” and 1 x 2.5”/3.5”) Expansion Slots 7 + 3 GPU Clearance Supports GPU up to 387mm (without front radiator) CPU Cooler Clearance Supports CPU cooler up to 180mm Air Cooling Front: 120mm x 3 or 140mm x 2 (Max.)
Top: 120mm x 2 or 140mm x 2 (Max.)
Rear: 120mm x 1 or 140mm x 1 (140mm ARGB fan x 1 included) Liquid Cooling Front: 120/240mm Radiator (Optional)
Top: 120/240mm Radiator (Optional)
Rear: 120mm Radiator (Optional) I/O Ports USB3.0 x 2 | HD Audio & Mic. Internal Cable Management Depth 26.55mm Power Supply ATX PSU (Including cables, up to 223mm) (Optional) Warranty 1 Year Note *** Features, Price, Specifications are subject to change without notice.